I forgot it and all my other accounts are limited. I also don’t have the windows xp recovery disc. I tried websites like loginrecovery.com, etc. but i still can’t retrieve my password. I tried the command prompt thing, still won’t work.
Plan A: вЂњAdministratorвЂќ User
The вЂњadminвЂќ methodвЂќ is pretty straightforward. On many Windows XP systems, especially on the Home editions preconfigured by third-party OEM manufactures like Dell and Compaq, the installation creates a user called вЂњAdministratorвЂќ with, of course, administrator group policy privileges. It creates this user so consumers can fix what theyвЂ™ve messed up if locked out of their accounts. This user can only be accessed in safe more. Conveniently, it is not password protected at all!
1. Just restart the computer. In between the appearance of the BIOS POST screen and the Windows XP boot screen, alternate pressing Ctrl and F8.
2. The Windows boot menu should appear. Select any вЂњsafe mode.вЂќ
3. On the login screen, you should see вЂњAdministrator.вЂќ If you donвЂ™t, press Ctrl + Alt + Del twice and manually enter the вЂњAdministratorвЂќ in without at password.
4. Once successfully logged in, go to the вЂњControl PanelвЂќ and make necessary modifications to the user profiles.
If you are stuck at any of these steps or if it flat-out does not work, youвЂ™ll have to switch to вЂњPlan BвЂќ вЂ¦ not the morning after pill. 🙂
Plan B: вЂњSYSTEMвЂќ User
There are many variations of this method. Basically, you gain control of the вЂњSYSTEMвЂќ user, which is the highest user on the power hierarchy. The two main ones involve either the windows internal scheduling system or the screensaver. There are a couple of requirements for this method. First, you will need any type of user access, be it Limited User or Guest. Second, either the scheduling system has to be enabled or the screen saver has to be configured. Lastly, Windows cannot be patched. IвЂ™m pretty sure Microsoft would have plugged the hole since this discovery was a breakthrough in the tech world last year.
The вЂњATвЂќ command schedules the operating system to run programs automatically. For example, if you want the operating system to make a backup of a crucial file or if you want the operating system to update the dynamic DNS provider with the current IP address, вЂњATвЂќ is at your command. It is the windows equivalent to the *nix cron command. The loophole is who runs the program when it is time to execute it. The вЂњSYSTEMвЂќ user runs the command instead of the original user. So, if you schedule the OS to run вЂњcmdвЂќ in the next minute, youвЂ™ll get the console DOS prompt for the вЂњSYSTEMвЂќ user.
1. Go to вЂњStart MenuвЂќ then вЂњRunвЂќ
2. Type in вЂњcmd.exeвЂќ
3. In the command prompt type вЂњat 4:25pm /interactive cmd.exeвЂќ replacing the time with the next minute.
4. When the new command prompt appears, type вЂњnet user username passwordвЂќ replacing вЂњusernameвЂќ with your target user and вЂњpasswordвЂќ with the password combination that you want to set.
Screen Saver Variation
When it is time for Windows to display the screen saver, the SYSTEM runs the screensaver file (which is pretty much an *.exe file renamed *.src). If you replace the default screensaver file with the cmd.exe file, again, you will obtain access to the вЂњSYSTEMвЂќ console.
1. Go to вЂњStart MenuвЂќ then вЂњRunвЂќ
2. Type in вЂњcmd.exeвЂќ
3. Type вЂњcd\вЂќ
4. Type вЂњcd\windows\system32вЂі
5. mkdir temphack
6. copy logon.scr temphack\logon.scr
7. copy cmd.exe temphack\cmd.exe
8. del logon.scr
9. rename cmd.exe logon.scr
The next time the screen saver is supposed to run, the command prompt will display. Then you can type вЂњnet user username passwordвЂќ replacing вЂњusernameвЂќ with your target user and вЂњpasswordвЂќ with the password combination that you want to set.
Plan C: ":Repair OS":
If thatвЂ™s your only problem, then you probably have nothing to worry about. As long as you have your Windows XP CD, you can get back into your system using a simple but effective method made possible by a little known access hole in Windows XP.
This method is easy enough for newbies to follow вЂ“ it doesnвЂ™t require using the Recovery Console or any complicated commands. And itвЂ™s free – I mention that because you can pay two hundred dollars for an emergency download of Winternals ERD with Locksmith which is a utility for unlocking lost Windows passwords. See here http://www.winternals.com/products/repai…
ERD is an excellent multi purpose product, but you should know it is not a necessary one if you have a healthy system and your sole problem is the inability to logon to Windows due to a forgotten password. Not necessary because you can easily change or wipe out your Administrator password for free during a Windows XP Repair. HereвЂ™s how with a step-by-step description of the initial Repair process included for newbieвЂ™s.
1. Place your Windows XP CD in your cd-rom and start your computer (itвЂ™s assumed here that your XP CD is bootable вЂ“ as it should be – and that you have your bios set to boot from CD)
2. Keep your eye on the screen messages for booting to your cd Typically, it will be вЂњPress any key to boot from cdвЂќ
3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.
4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now
5. The Licensing Agreement comes next – Press F8 to accept it.
6. The next screen is the Setup screen which gives you the option to do a Repair.
It should read something like вЂњIf one of the following Windows XP installations is damaged, Setup can try to repair itвЂќ
Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process.
7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.
8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically вЂ“ you will see a progress bar stating вЂњYour computer will reboot in 15 secondsвЂќ
9. During the reboot, do not make the mistake of вЂњpressing any keyвЂќ to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.
10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.
11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.
12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After youвЂ™ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).
13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.
I tested the above on Windows XP Pro with and without SP1 and also used this method in a real situation where someone could not remember their password and it worked like a charm to fix the problem. This security hole allows access to more than just user accounts. You can also access the Registry and Policy Editor, for example. And its gui access with mouse control. Of course, a Product Key will be needed to continue with the Repair after making the changes, but for anyone intent on gaining access to your system, this would be no problem.
And in case you are wondering, NO, you cannot cancel install after making the changes and expect to logon with your new password.
Cancelling will just result in Setup resuming at bootup and your changes will be lost.
Ok, now that your logon problem is fixed, you should make a point to prevent it from ever happening again by creating a Password Reset Disk. This is a floppy disk you can use in the event you ever forget your log on password. It allows you to set a new password.
Here’s how to create one if your computer is NOT on a domain:
* Go to the Control Panel and open up User Accounts.
* Choose your account (under Pick An Account to Change) and under Related Tasks, click ":Prevent a forgotten password":.
* This will initiate a wizard.
* Click Next and then insert a blank formatted floppy disk into your A: drive.
* Click Next and enter your logon password in the password box.
* Click Next to begin the creation of your Password disk.
* Once completed, label and save the disk to a safe place
How to Log on to your PC Using Your Password Reset Disk
Start your computer and at the logon screen, click your user name and leave the password box blank or just type in anything. This will bring up a Logon Failure box and you will then see the option to use your Password Reset disk to create a new password. Click it which will initiate the Password Reset wizard. Insert your password reset disk into your floppy drive and follow the wizard which will let you choose a new password to use for your account.
Note: If your computer is part of a domain, the procedure for creating a password disk is different.
See here for step by step instructions: http://support.microsoft.com/default.asp…
This is a good link for downloading Password Recovery for free http://j.mp/1r4W2Xg
It’s the best software of its kind.
Have a nice day
Reset Your Windows Password : http://tinyurl.com/askjDCX3Q
Don’t listen to these guys, they clearly have no clue on what they’re talking about. I am a developer at Microsoft so I know a thing or two about computers. The only way to reset your windows password 100% safe is to use a software called Reset Password Pro.
The software allows you to create a boot-disk, that can be made on a CD/DVD or USB stick. The boot-disk can then be inserted into any locked machine, and it’s a simple case of pressing reset. Here is their official site: http://www.resetwindowspass.com
Hey, it is not difficult to reset windows xp password with a right software.
This video below has ever helped me, you can take a look.
I followed the video below to help me recover lost XP admin password easily! The tool referred worked like a charm!
Here is a password cracker. Download the Windows version about half way down the page.
It is a pretty advanced, but it works. There is a PRO version which is supposed to be easier to use.
i DID EVERYTHING AS INSTRUCTED BUT IT STILL TOOK ME TO THE LOGON SCREEN FOR WINDOW WITH THE ADMINISTRATOR AND THE PSWRD… SCREEN THATS ALL GO FIGURE IT WONT LET ME GO PASS THAT SCREEN I DID IT ON SAFE MODE ALSO BUT IT COMES BACK TO THE ADMINISTRATOR USRN SCREEN AND PSWRD.. WHAT TO DO.. I SEEN MANY VIDEOS AND THEY ALL LOOK THE SAME AND I FOLLOW STEP BY STEP UNTIL I HIT THE SAFE MODE AND THEN IT GOES RIGHT BACK TO ASKING ME FOR THE PASSWRD WHICH I DONT HAVE ITS WINDOWS XP PROFESSIONAL EDITION… CAN ANYONE HELP ME PLEASE
[email protected] please only if you can help thanks
Thank you Alex
Your solution is very simple but it really useful. Thank you again.
What I need to do